Yamaha YSP-5100BL Quick Reference Manual

Quick Reference Guide
This Quick Reference Guide explains steps to connect external components to this unit and start playback. For detailed
operation, refer to the "Owner's Manual" in the supplied CD-ROM.
Check that you received all of the supplied accessories referring to "Supplied accessories" (page 6 of "Safety and Accessory Information" (separate booklet)). For
instructions on how to operate or set the external components, refer to the owner's manual supplied with each component.

Installing this unit

1
Decide where to install this unit.
This unit uses sound beams to create surround effects (the arrows in the following diagrams indicate the images of paths of 5-channel sound beams). To achieve desired
surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound beams.
When installing this unit parallel to the wall
: Object such as furniture
Attach the stands.
Attach the supplied stands to this unit as shown below. Make sure that you attach
the left and right stands correctly. These stands are unnecessary if you use the
optional wall mount bracket.
Right stand (supplied)
Screws (for stands, supplied)
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
Left stand (supplied)
When installing this unit in the corner of a room
40° to 50°
: Object such as furniture
When installing this unit using a rack
When installing this unit, be careful not to scratch this unit, rack or floor. Depending
on your installation environment, connections with external components (next step)
should be done before installation.
–  –
for North America
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
INPUT
VOLUME
INTELLIBEAM
MIC
English