Cisco 2431 - IAD Router Hardware Installation Manual page 67

Appendix C Connecting to DC Power
Figure C-2
Step 5 Use the two number-10-32 screws to attach the ground lug and wire assembly to the rear panel of
the switch.
Using a ratcheting torque screwdriver, torque each ground-lug screw to 15 lbf-in. (240 ounce-force
Step 6
inches [ozf-in.]).
Figure C-3 Torquing Ground-Lug Screws
1 Torque to 15 lbf-in.
OL-7678-01
Crimping the Ground Lug
Figure C-3 shows how to torque the ground screws on a Cisco ME DC switch.
Cisco ME 2400 Ethernet Access Switch Hardware Installation Guide
1
Grounding the Switch
C-3