HP D7171A - NetServer - LPr Configuration Manual page 2

SPU
Model
Clock speed
No. of CPUs
BIOS version
CPU cache
RAM
No. of power supplies
Local storage
I/O slots:
Storage
Local
Controller
Driver
Cabinets (Physical drive
location)
Disk drives (hot swap or
fixed)
SCSI bus
SCSI Ids
Shared
HP Rack Storage/12FC
Host Bus Adapter
Model
No. of HBAs
Driver
SPU I/O slot
RAID level
Cabinet
RAID arrays
No. of cabinets
FC Array Cards
Model
No. of cards/cabinet
HP NetServer LXr 8000
400/450, 500/550 MHz
2 – 4
Rel 10 or later
Any size
256 MB minimum. Must be HP.
3
See Local Storage below.
P8 – P7 Host Bus Adapter
P8 – P2 Client LAN
P7 – P1 Intra-cluster (Heartbeat) LANs
P2 – Remote card (optional)
NOTE The Client LAN must be installed in a higher PCI slot than the
Intra-cluster LAN.
May Use - Embedded SCSI, NetRAID-1Si or NetRAID-3Si in PCI slot
P1, otherwise any controller listed on the HP Tested Products List.
May Not Use - NetRAID-1 or NetRAID-3
2.24
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Must be HP
Any HP cables that meet SCSI specifications and any SCSI bus speed.
Any
(Required)
HP D8602A
1
1.12 or later
P8 or P7
0, 1, 3, 5, or 0 & 1
Not more than 8 physical drives per logical array and not more than 8
LUNs are permitted per Rack Storage/12FC and Rack Storage/12
combination in a cluster.
1
D5990A
1 - Simplex (Supplied with Rack Storage/12FC.)
2 - Duplex (Additional card required in the Rack Storage/12FC.)
2