HP D7171A - NetServer - LPr Configuration Manual page 2

System software:
Navigator version
Operating System
Service Pack
SPU
Model
Clock speed
No. of CPUs
BIOS version
CPU cache
RAM
Local storage
Microsoft and HP
Certified
Configuration
Storage
Local
Controller
Driver
Cabinets (Physical drive
location)
Disk drives
SCSI bus
SCSI Ids
Shared
HP Rack Storage/12FC
Host Bus Adapter
Model
No. of controllers
Driver
RAID level
Cabinet
RAID arrays
No. of cabinets
FC Array Cards
Model
No. of cards/cabinet
Firmware
L.20.00 or later
Microsoft Windows NT 4.0
SP6a or later
HP NetServer LP1000r
1 GHz
2
4.06.12 or later
Any size
256 MB minimum. Must be HP.
See Local Storage below.
P1 – Shared Storage FC HBA (D8602A)
Booted from Embedded SCSI
Embedded SCSI
SYM_U3.SYS Version 5.05.00 or later (Navigator L.20.00 or later).
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Must be HP (hot swap or fixed).
Any HP cables that meet SCSI specifications and any SCSI bus speed.
Any
Required - D5991A
HP Fibre Channel Host Bus Adapter - HP D8602A
1
HP D8602A - Hhba5100.sys Version 2.06
0, 1, 3, 5, 10
For SPOFless configurations a fault tolerant RAID type, e.g. RAID 5, is
recommended for all shared storage.
HP Rack Storage 12/FC – D5991A
Not more than 8 physical drives per logical array and not more than 8
LUNs are permitted per cluster.
1
HP Fibre Channel Array Controller - D5990A
2 (Requires second card be installed in the Rack Storage/12FC.)
4.64-00 or later
5.46-04
2