Download Print this page

HP D7171A - NetServer - LPr Installation Manual page 8

Netware installation guide
Hide thumbs Also See for D7171A - NetServer - LPr:

Advertisement

For the NetServer LX and LXe, the slot number you may use are 127 and
128.
5. Follow the instructions to continue the installation process. When you come to
the point where you create the STARTUP.NCF file, make sure that the slot
numbers are correct. If not, you must change them.
Be sure to choose the slot number that relates to the PCI SCSI controller (A or
B, respectively) to which your hard disk drive is connected. Otherwise, the
server will not recognize the driver, and the screen will display "Unable to find
AIC7870 driver" the next time you boot the server.
6. Continue to the end of the installation process.
Installing the SCSI Drivers on NetWare 4.10
1. Create the Drivers Diskette and install the CD-ROM drive for the DOS
environment as explained in "Installing the SCSI Drivers on NetWare 3.12"
above.
2. Remove the HP NetServer Navigator CD-ROM and insert the NetWare 4.10
CD-ROM.
3. Follow the NetWare 4.10 Installation and Upgrade documentation to create a
NWSERVER subdirectory on drive C.
4. Unlike NetWare 3.12, the NetWare 4.10 installation process reads the disk
driver from the CD-ROM automatically. You are prompted in the "Choose the
Server Drivers - Disk Driver" screen.
5. Press the Insert key on your keyboard to choose "Install an Unlisted Driver".
6. Press F3 key to assign a directory path.
7. At the "Specify a directory path" window type:
A:\NW410\PCISCSI
The screen will display a set of drivers.
Select "AIC7870.DSK driver" to install the driver.
8. The installation program will auto-detect and display the slot number of the
embedded controller, press <Enter> to select it.
9. Continue to the end of the installation process.
NOTE
When installing NetWare 4.10 you do not need to REM out
the following lines in the CONFIG.SYS file:
Device=C:\DOS\HIMEM.SYS
DOS=HIGH
Installing the SCSI Drivers on NetWare 4.11/IntranetWare
1. Boot your HP NetServer with HP Navigator CD-ROM.
2. Follow the instructions to create a NetWare 4.11/IntranetWare Drivers
Diskette. (Optional for NetWare 4.11/IntranetWare)

Advertisement

loading