HP D7171A - NetServer - LPr Upgrade Manual page 20

Chapter 3
Figure 3-8. Unlock the Slides
4. Grasp the ejector handles and push the satellite chassis all the way
forward until it locks into position against the base chassis. Be careful to
keep the ejector handles in the "down" position.
5. Push the ejector handles up until they stop. You should hear a click.
6. Replace the retention bracket as shown in Figure 3-3.
7. Reconnect any cables to PCI cards you might have disconnected earlier.
Reconnect the AC power cord if you disconnected it earlier.
8. Lock the power interlock switch by turning it counterclockwise as shown
in Figure 3-9.
9. At the front, relatch the power supplies. Ensure the indicator lights come
up correctly. See "Power Supply Indicators" in the HP NetServer LXr
Pro8 User Guide.
16
Perform the Upgrade