Step 4: Connect Scsi Cable Adapter (If Required); Step 5: Continue Installation - HP D7171A - NetServer - LPr Installation Manual

Chapter 1

Step 4: Connect SCSI Cable Adapter (if required)

The SCSI cable adapter (see Figure 1-11) allows you to connect an Ultra/Wide
SCSI drive to a narrow SCSI cable and narrow SCSI controller. If you are not
connecting your drive to a narrow cable, continue with Step 5.
Figure 1-12. Narrow to Ultra/Wide SCSI Adapter
Plug the narrow SCSI cable into the adapter, aligning the notch in the
connector with the slot in the adapter.
Plug the other end of the adapter into the drive. The shape of the connector
prevents it from being plugged into the drive incorrectly.

Step 5: Continue Installation

If you are installing the drive in an HP NetServer L Series, continue with
Chapter 2. If you are installing the drive in an HP NetServer E 45, continue with
Chapter 3.
14
Prepare Drive for Installation