100/120 Vac Rack Power Configurations - HP D7171A - NetServer - LPr Manual

Chapter 3
Figure 3-4. Power Connection Locations on a Typical Rack (Rear View)

100/120 VAC Rack Power Configurations

The 120 VAC PDU power configurations are detailed in the recommendations
shown below and in Table 3-1 and Figure 3-5.
NOTE
100 VAC configurations are the same as 120 VAC, except
for the UPS and the cable that connects the PDU to it. See
Table 3-1 and the notes that accompany it.
Procedure for Connecting and Routing Cables to the LH 6000r
39