HP D7171A - NetServer - LPr User Manual page 44

Chapter 6
Figure 6-2. Removing a Mass Storage Filler Panel
2. Drive spacers attach to the disk drive module with four small feet. If you
need to remove a drive spacer from the adjacent disk drive module,
remove it as follows:
Slide the drive spacer back, a fraction of an inch away from your body.
Tilt up the front of the drive spacer to disengage the front two feet.
Pull the drive spacer forward slightly to disengage the back two feet
and lift (see Figure 6-3).
38
Installing Mass Storage Devices