HP D7171A - NetServer - LPr Installation Manual page 30

Chapter 2
l
The third state is the normal power shutdown.
Unless the power cord is removed from the power source, all activity stops
except the internal clock and the front panel LCD display.
To go to a fully powered-down state, press the front panel Power
switch for more than four seconds.
To go to a fully powered-up state, press the power switch for less than
four seconds (default) and full operation is restored, including the
status screen display and the power LED.
NOTE
The NOS may provide programming features to add more
sleep states, to change the activation time for each state, and to
shutdown or wake up the HP NetServer at certain times,
depending on the way the NOS interface is programmed. This
option can be provided through the TopTools Remote Control
card (Wake on RTC) or wake up through a LAN connection
(Wake on LAN).
22
Controls, Indicators, and Ports