Summary of Contents for HP StorageWorks 2/32 - SAN Switch
Page 1
installation guide hp StorageWorks SAN switch 2/32 Product Version: 4.0.x Second Edition (February 2003) Part Number: AA-RTQVB-TE This installation guide provides basic procedures for setting up, configuring, and managing the SAN Switch 2/32 and SAN Switch 2/32 Power Pak models.
contents Contents About this Guide........... .9 Overview.
Page 4
Contents Power Requirements ........... . 29 Setting Up the Switch as a Stand-alone Unit .
Page 5
Contents Displaying the Optional Feature Licenses....... . . 69 Running Basic Switch Operations Using Telnet ........70 Logging into the SAN Switch 2/32 .
about this guide About this Guide This installation guide provides information to help you: Set up and configure the hp StorageWorks SAN Switch 2/32. About this Guide Maintain and operate the switch. About this Guide topics include: Overview, page 10 Conventions, page 11 Rack Stability, page 14...
About this Guide Overview This section covers the following topics: Intended Audience Prerequisites Related Documentation Intended Audience This book is intended for use by customers who purchased the SAN Switch 2/32, and for authorized service providers who are experienced with the following: Configuration aspects of customer Storage Area Network (SAN) fabric Customer host environments, such as Windows 2000, Windows NT, and IBM Web Tools Graphical User Interface (GUI), for configuring the switch via a...
About this Guide Conventions Conventions consist of the following: Document Conventions Text Symbols Equipment Symbols Document Conventions The document conventions included in Table 1 apply in most cases. Table 1: Document Conventions Element Convention Cross-reference links Blue text: Figure 1 Bold Key and field names, menu items, buttons, and dialog box titles...
About this Guide Caution: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or data. Note: Text set off in this manner presents commentary, sidelights, or interesting points of information. Equipment Symbols The following equipment symbols may be found on hardware for which this guide pertains.
Page 13
About this Guide Power supplies or systems marked with these symbols indicate the presence of multiple sources of power. WARNING: To reduce the risk to personal safety from electrical shock, remove all power cords to completely disconnect power from the power supplies and systems. Any product or assembly marked with these symbols indicates that the component exceeds the recommended weight for one individual to handle safely.
About this Guide Rack Stability Rack stability protects personnel and equipment. WARNING: To reduce the risk of personal safety or damage to the equipment, be sure that: The leveling jacks are extended to the floor. The full weight of the rack rests on the leveling jacks. In single rack installations, the stabilizing feet are attached to the rack.
About this Guide Getting Help If you still have a question after reading this guide, contact an HP authorized service provider or access our website: http://www.hp.com. HP Technical Support In North America, call technical support at 1-800-652-6672, available 24 hours a day, 7 days a week.
Page 16
About this Guide Elsewhere, see the HP website for locations and telephone numbers: http://www.hp.com. SAN Switch 2/32 Installation Guide...
Overview The HP StorageWorks SAN Switch 2/32 is a high-performance, 32-port, 2 gigabit (Gb) Fibre Channel switch used to interconnect storage devices, hosts, and servers in a Storage Area Network (SAN). It integrates Fabric Operating System (FOS) firmware V4.0.2x or higher, and is compatible with the HP StorageWorks switch product family.
Overview SAN Switch 2/32 Features Read the following sections for feature-specific information. Firmware The SAN Switch 2/32 operates using FOS firmware version 4.0.2x or higher. The firmware supports: High-speed data traffic using Interswitch Link (ISL) trunking technology Automatic rerouting through the Fabric Shortest Path First (FSPF) algorithm Application Programming Interface (API) which is a protocol that allows applications to interface with switch services Zoning functionality which provides a means to allocate storage controllers to...
Overview Three redundant fan assemblies, hot-swappable if replaced one at a time A field-replaceable motherboard assembly enclosed in a grounded EMI cage Slide Rack Mount Kit The following LED indicators: — Switch Power/Status LED on the port side of the switch —...
Overview Optical Ports The Fibre Channel ports are numbered from left to right, with ports 0–15 in the lower row, and ports 16–31 in the upper row. The ports provide the following functionality: Automatic negotiation to highest common speed of all devices connected to port Port interfaces compatible with Small Form Factor Pluggable (SFP) transceivers, both Short Wavelength (SWL) and Long Wavelength (LWL)
Overview Optional Hardware Kits HP provides the following optional hardware kits in support of the SAN Switch 2/32; see Table Table 2: SAN Switch 2/32 Orderable Hardware Accessory Part Number Short wavelength SFP A6515A* or 300834-B21** Long wavelength SFP, 10 km A6516A* or 300835-B21** 2m LC-to-LC Fibre Channel (fc) cable C7524A*...
Page 22
Overview SAN Switch 2/32 Installation Guide...
Installing the SAN Switch 2/32 This chapter covers the following topics: Unpack and Verify Carton Contents, page 24 Locating SAN Switch 2/32 Serial Numbers, page 27 Installation and Safety Guidelines, page 28 Setting Up the Switch as a Stand-alone Unit, page 30 Installing the SAN Switch 2/32 in an HP Series 9000 or EIA Cabinet, page 31 Installing the Switch in the Optional HP System/e...
Installing the SAN Switch 2/32 Unpack and Verify Carton Contents Unpack and inspect the SAN Switch 2/32 carton contents as follows: 1. Inspect the shipping container for possible damage caused during transit. 2. Unpack the shipping cartons. Note: The Rack Mount Kit shown in Figure 3 may not represent the kit that shipped with your switch.
Installing the SAN Switch 2/32 Note: If any items are damaged or missing, please contact HP or an HP authorized reseller. SHR-2570A Figure 3: Shipping carton contents SAN Switch 2/32 Installation Guide...
Installing the SAN Switch 2/32 Table 3: Shipping Carton Contents Number Item One HP StorageWorks SAN Switch 2/32 product accessories box containing: One RS-232 Serial cable (convertible to an RJ-45 connector, by removing the adapter on the end of the cable) Rack Mount hardware pouch: —...
Installing the SAN Switch 2/32 Locating SAN Switch 2/32 Serial Numbers Before contacting HP for technical support or service, obtain the three serial numbers located on the switch. Each serial number provides specific logistical information, identifying the device’s manufacturing location. SAN Switch 2/32 Installation Guide...
Installing the SAN Switch 2/32 Installation and Safety Guidelines Read the following sections for installation guidelines. Install the SAN Switch 2/32 in one of the following ways: As a stand-alone unit on a flat surface. In an Electronics Industries Association (EIA) cabinet (like the HP 9000 Series Rack), using the Slide Rack Mount Kit provided with the switch.
Installing the SAN Switch 2/32 Follow these guidelines to ensure proper air flow, and prevent component overheating: To ensure adequate cooling, install the switch with the non-port side, which contains the air intake vents, facing the cool-air aisle. Verify a minimum of 47 cubic feet/minute (79.8 cubic meters/hour) of air flow is available to the air intake vents on the non-port side of the switch.
Installing the SAN Switch 2/32 Setting Up the Switch as a Stand alone Unit Use these procedures for setting up the switch as a stand-alone unit. The following items are required for this setup: SAN Switch 2/32 AC power cords and cables supplied with the switch Rubber mounting feet supplied with the switch 1.
Installing the SAN Switch 2/32 Installing the SAN Switch 2/32 in an HP Series 9000 or EIA Cabinet Read the following sections for complete installation instructions. Before you begin, obtain the following tools: #2 Phillips screwdriver, with torque capability Torx screwdriver Slotted blade screwdriver, 1/4 inch, with torque capability Rack Mount Checklist Verify that the rack and the area around the rack meets the following...
Installing the SAN Switch 2/32 Installing the Slide Rail Assemblies to the Switch The SAN Switch 2/32 Rack Mount Kit consists of two slide rail assemblies consisting of an inner slide rail attached to an outer slide rail. Read the following sections for complete instructions on first separating, then installing the Slide Rail Assemblies.
Installing the SAN Switch 2/32 Caution: HP recommends installing the SAN Switch 2/32 so that the port side of the switch slides out the rear of the rack (as described in step 1a below). In this way, the switch faces the aisle where exhaust air is released. Air intake and exhaust for all components in the rack should flow in the same direction.
Installing the SAN Switch 2/32 Attaching the Rear or Front Rack Mount Brackets The Rack Mount Kit supplied with the SAN Switch 2/32 contains two rear rack mount brackets and two front rack mount brackets. Install these rack mount brackets to prevent the switch from accidentally sliding out of the rack, as follows. Caution: HP recommends installing the SAN Switch 2/32 so that the port side of the switch slides out the rear of the rack.
Installing the SAN Switch 2/32 3. Tighten the screws and torque to 15 inch-pounds. 4. Repeat steps 1 through 3 to install the left mount bracket on the left side of the switch; see Figure For Front Rack Access Use these steps to attach the front rack mount brackets to the switch. The front rack mount brackets act as “stops”...
Page 36
Installing the SAN Switch 2/32 Note: Before starting this procedure, verify that two of the slide mount L-brackets are preinstalled at the end of each outer slide rail; see Figure 6. The L-brackets are necessary to attach the outer rails to the rack. 1.
Installing the SAN Switch 2/32 7. Secure each L-bracket and 3-hole bar nut to the rack’s rails with two Phillips head 10-32 x 3/8 inch screws (and attached square alignment washers); see Figure [1] Select this graphic frame. [2] Select File. [3] Select Import.
Installing the SAN Switch 2/32 9. Repeat steps 5 through 7 to secure the other end of the outer slide rail. 10. Repeat steps 3 through 7 to install the second outer slide rail. Finalizing the Rack Mounting Procedure Read this section to finalize the rack mount procedure. Positioning the Switch in the HP 9000 Series Rack Follow these steps to install the switch in the rack.
Installing the SAN Switch 2/32 SHR-2577A Figure 7: Sliding the SAN Switch 2/32 into an HP 9000 Series rack 4. To verify proper alignment, slide the switch in and out of the rack. Securing the Rack Mount Brackets Secure the Rack Mount Brackets (installed earlier; see “Attaching the Rear or Front Rack Mount Brackets”) to the rack rails, as follows:...
Installing the SAN Switch 2/32 Installing the Switch in the Optional HP System/e Rack This section provides instructions for installing the SAN Switch 2/32 in the optional HP System/e rack. The HP System/e Rack Kit consists of the following items: HP System/e Rack Rail Kit - pre-merger HP part number A7340-87901;...
Installing the SAN Switch 2/32 2. Choose a mounting location in the rack for the switch. 3. Install each of the two mounting brackets with (1) M5 Torx head screw with captive lock washers as shown in Figure SHR-2581A Figure 8: Installing the mounting brackets 4.
Installing the SAN Switch 2/32 SHR-2582A Figure 9: Installing the Tinnerman clips 5. Assemble the outer rails by completing the following steps: a. As an aid in assembly, two rubber washers have been included to help keep the rear slotted portion of the outer rail flush against the rear rail-tray brackets.
Installing the SAN Switch 2/32 [1] Select this graphic frame. [2] Select File. [3] Select Import. [4] Select File. [5] Choose the appropriate graphic file name. [6] Make sure you’ve checked the Copy Into Document. [7] Select Import. Position the illustration as required. [8] Adjust the size of the outer graphic frame as required.
Installing the SAN Switch 2/32 7. Assemble the two inner rails (one on each side) to the switch using (6) #8-32 x 5/16 inch Phillips pan-head screws, and #8 flat washer as shown in Figure Figure 11: Assembling the inner rails Caution: Do not use any screws other than the six that are provided.
Installing the SAN Switch 2/32 Connecting AC Power Use these steps to power on the SAN Switch 2/32. Caution: Do not plug the power cords into the power source until the switch is completely installed in the rack. 1. Connect the SAN Switch 2/32 power cords to the power connectors on the switch, see Figure SHR-2571A...
Installing the SAN Switch 2/32 Power On Self-Test Each time the switch is powered on, rebooted, or reset, the switch automatically runs POST. During POST, the port status LEDs flash, verifying that the switch is operating properly. POST completes in approximately six minutes, with total boot time approximately seven minutes.
Installing the SAN Switch 2/32 Configuring SAN Switch 2/32 Network Addressing Read the following sections for information on how to configure the SAN Switch 2/32 addressing scheme. For instructions about configuring the switch to operate in a fabric containing switches from other vendors, refer to the HP StorageWorks Fabric OS Procedures Version 3.0.x/4.0.x User Guide.
Installing the SAN Switch 2/32 Note: During first time setup, you must replace the factory IP, subnetmask and gateway addresses with addresses provided by your Network Administrator. 1. Remove the shipping plug from the SAN Switch 2/32 Serial port. 2. Connect the Serial cable to the SAN Switch 2/32 Serial port; see Figure SHR-2572A Figure 13: Connecting the Serial cable...
Page 49
Installing the SAN Switch 2/32 6. Using Hyperterminal (or similar application), configure the port settings as follows: Bits per second: 9600 Databits: 8 Parity: None Stop bits: 1 Flow control: None To configure port settings in a UNIX environment, type: tip /dev/ttyb -9600 7.
Page 50
Installing the SAN Switch 2/32 Caution: The Serial port is intended only for use during the initial setting of the IP address and for service purposes. Using the Serial port during normal switch operation or for regular maintenance is not recommended. 8.
Installing the SAN Switch 2/32 Connecting the SAN Switch 2/32 to the LAN Use the following steps to connect the SAN Switch 2/32 to the Ethernet Local Area Network (LAN) segment. 1. Remove the shipping plug from the SAN Switch 2/32 Ethernet port. 2.
Installing the SAN Switch 2/32 Core Switch PID Format Summary A Core PID format is one of several addressing formats used in Fibre Channel. The parameter is used by the routing and zoning services in Fibre Channel fabrics to identify ports in the network. The PID format is analogous to specifying the physical switch and port that a device is attached to in data networks.
Page 53
Installing the SAN Switch 2/32 For detailed recommendations and instructions on updating the Core Switch PID, please refer to Appendix B in this guide, “Updating the Core Switch PID Format.” SAN Switch 2/32 Installation Guide...
Installing the SAN Switch 2/32 Optional Configuration Settings The following sections describe how to modify domain IDs and status policies. Modifying Domain IDs Optional. Modify the domain IDs, if desired, as follows. Note: The default domain ID is 1. If the default domain ID is already in use when the switch is connected to the fabric, the domain ID for the new switch is automatically reset to a unique value.
Page 55
Installing the SAN Switch 2/32 Note: Configure each port to match the topology of each host or target before connecting to the device. The default port configuration is fabric, not private loop. The switch does not auto-sense topology. SAN Switch 2/32 Installation Guide...
Installing the SAN Switch 2/32 Connecting the SAN Switch 2/32 to the Fabric Use these steps to connect the SFPs and cables to SAN Switch 2/32 ports as required. Note: The ports and cables used in trunking groups must meet specific requirements. HP StorageWorks ISL Trunking Version For a list of these requirements, refer to the 3.0.x/4.0.x User Guide...
Installing the SAN Switch 2/32 SHR-2574A Figure 15: Inserting a cable into an SFP Note: The cable is keyed so that it can only be inserted correctly into the SFP. If the cable does not slide in easily, check the orientation. Verifying Operation After making the appropriate connections, as outlined in this chapter, use these steps to verify that the switch is running properly.
Installing the SAN Switch 2/32 Installing Multiple Switches into an Existing SAN Use these steps to set up more than one SAN Switch 2/32 in an existing SAN. 1. Connect the appropriate components as outlined in the installation section of this chapter.
Installing the SAN Switch 2/32 Recommendations for Cable Management HP recommends following these cable management guidelines: Plan cable management before installing the switch in a rack. Leave at least one meter of slack for each port cable (this provides room to remove and replace the switch).
Page 60
Installing the SAN Switch 2/32 SAN Switch 2/32 Installation Guide...
Managing the SAN Switch 2/32 This chapter covers the following topics: Interpreting LED Activity, page 62 Management Overview, page 68 Running Basic Switch Operations Using Telnet, page 70 SAN Switch 2/32 Diagnostics, page 74 Field Replaceable Units, page 75 SAN Switch 2/32 Installation Guide...
Managing the SAN Switch 2/32 Interpreting LED Activity SAN Switch 2/32 status is determined through the LED activity on the switch. There are three possible LED states: no light, a steady light, and a flashing light. The lights may be any of the following colors: Green Orange (may be referred to as “amber”...
Managing the SAN Switch 2/32 Table 4 describes the LEDs on the port side of the switch. Table 4: Front Panel LED Patterns During Normal Operation LED Name Color Hardware Recommended Location Location Display Status Action Switch On far No light Switch is off, or Verify switch is on Power/...
Page 64
Managing the SAN Switch 2/32 Table 4: Front Panel LED Patterns During Normal Operation (Continued) LED Name Color Hardware Recommended Location Location Display Status Action Fast-flashing Port is in internal No action green loopback required. (diagnostic). Flickering Port is online, with No action green traffic flowing...
Managing the SAN Switch 2/32 Table 4: Front Panel LED Patterns During Normal Operation (Continued) LED Name Color Hardware Recommended Location Location Display Status Action Port Status Location Alternating Port is bypassed. Reset the port from (continued green and a management orange station or check (continued)
Managing the SAN Switch 2/32 Table 5: Non-Port Side LED Patterns During Normal Operation Name Color Hardware Recommended Location Location Display Status Action Port On far No light Switch is off, or Verify switch is on Readiness right when boot is not and has viewing complete, or...
Page 67
Managing the SAN Switch 2/32 Table 5: Non-Port Side LED Patterns During Normal Operation (Continued) Name Color Hardware Recommended Location Location Display Status Action Steady green Power supply is No action providing required. power. Fan Failure On each No light Fan assembly is Verify power either healthy or...
Managing the SAN Switch 2/32 Management Overview You can use the management functions built into the SAN Switch 2/32 to monitor the fabric topology, port status, physical status, and other information to aid in performance analysis and system debugging. You can manage the switch using any of the management options listed in Table Note: For information about upgrading the version of Fabric OS installed on the...
Managing the SAN Switch 2/32 Table 6: Management Options for the SAN Switch 2/32 (Continued) Out-of-band In-band Management Tool Support Support Management server Ethernet or Native inband Serial interface For more information, refer to the connection (over HBA StorageWorks Fabric OS Procedures Version only) 3.0.x/4.0.x User Guide and the...
Managing the SAN Switch 2/32 Running Basic Switch Operations Using Telnet Read the following sections to run common switch operations via telnet. Logging into the SAN Switch 2/32 Use these steps to log into the SAN Switch 2/32. 1. Open a telnet connection to the switch. The login prompt is displayed if the telnet connection successfully found the switch in the network.
Managing the SAN Switch 2/32 2. At the command line, enter the following command: Password admin An interactive session is opened and you are prompted for configuration values. 3. At the New username prompt, enter a new name for the admin user. You can change the name of the admin user without changing the password.
Managing the SAN Switch 2/32 6. At the Fibre Channel Subnetmask prompt, enter the address of the subnetmask, if applicable. Press Enter. 7. At the Gateway Address prompt, enter the IP address of the gateway system if applicable. Press Enter. The configuration is then committed to the switch firmware.
Managing the SAN Switch 2/32 Setting the Switch Date and Time All switches maintain current date and time in non-volatile memory. Date and time are used for logging events. Switch operation does not depend on the date and time; a switch with an incorrect date and time value still functions properly. Uses these steps to set the date and time of a switch.
Managing the SAN Switch 2/32 SAN Switch 2/32 Diagnostics Read the following sections for information on using POST and diagnostic tests. Interpreting POST Results Each time the switch is powered on or reset, the switch automatically performs POST, a one-minute system check during which the port status LEDs flash different colors.
Managing the SAN Switch 2/32 Note: The transmit and receive speed of the links may be temporarily locked to a specific speed during diagnostic testing. Field Replaceable Units You can replace the power supplies, fan assemblies, and motherboard in the field without the use of special tools.
Managing the SAN Switch 2/32 The Fabric OS identifies the power supplies as follows (viewing the switch from the non-port side): Power supply #1 is on the right when viewing the switch from the non-port side. Power supply #2 is on the left when viewing the switch from the non-port side.
Managing the SAN Switch 2/32 Any of the following methods can be used to determine whether a fan assembly requires replacing: Check the Fan Failure LED on the face of the fan assembly Enter the fanshow command In Web Tools, click the Fan Status icon Motherboard Assembly The switch must be powered off and removed from the fabric (and possibly from the cabinet) to replace the motherboard assembly.
Page 78
Managing the SAN Switch 2/32 SAN Switch 2/32 Installation Guide...
Backing Up the Configuration and Upgrading Firmware This chapter covers the following topics: Backing Up System Configuration Settings, page 80 Restoring the System Configuration Settings, page 81 Upgrading or Restoring Switch Firmware, page 82 Downloading Firmware from the HP Website, page 83 SAN Switch 2/32 Installation Guide...
Backing Up the Configuration and Upgrading Firmware Backing Up System Configuration Settings HP strongly recommends saving the configuration after the initial configuration changes and periodically thereafter. FTP must be used on Windows workstations to back up the system configuration. The FTP server must be running before an upload can occur. Use the RSHD service or FTP on a UNIX machine.
Backing Up the Configuration and Upgrading Firmware Restoring the System Configuration Settings Use these steps to restore the system configuration settings from a backup. 1. Verify that the RSHD service or the FTP service is running on the host workstation. 2.
Backing Up the Configuration and Upgrading Firmware Upgrading or Restoring Switch Firmware The SAN Switch 2/32 ships with preloaded firmware. In most cases there is no need to update the firmware on the new switch. The firmware version can be determined by using: The version Telnet command The Switch Management Application page in Web Tools...
Backing Up the Configuration and Upgrading Firmware Downloading Firmware from the HP Website To download the firmware from the HP website, go to http://www.hp.com/support. The HP StorageWorks SAN Switch software CD contains the switch firmware, loaders, and downloading instructions. SAN Switch 2/32 Installation Guide...
Page 84
Backing Up the Configuration and Upgrading Firmware SAN Switch 2/32 Installation Guide...
Technical Specifications This appendix covers the following topics: Dimensions, page 86 Power Supply Specifications, page 87 Environmental Requirements, page 88 Memory Specifications, page 89 Serial Port Specifications, page 90 SAN Switch 2/32 Installation Guide...
Technical Specifications Dimensions Table 7 lists SAN Switch 2/32 dimensions. Table 7: Physical Specifications Dimension Value Height 2.58 in (65.5 mm) Depth 23.06 in (585.6 mm) Width 16.87 in (42.86 cm) Weight (with both power supplies) 35.8 lb (16.2 kg) SAN Switch 2/32 Installation Guide...
Technical Specifications Power Supply Specifications Table 8 lists power supply specifications. The power supply is universal and capable of functioning worldwide without using voltage jumpers or switches. It meets IEC 61000-4-5 surge voltage requirements. The power supply has its own built-in fan for cooling, pushing the air towards the front of the switch.
Technical Specifications Environmental Requirements Table 9 lists the environmental ranges that are acceptable when the switch is operating, and the acceptable ranges when the switch is not operating. Table 9: Environmental Requirements Condition Acceptable Range Temperature (operating) 10×C to 40×C Temperature (non-operating) -25×C to 70×C Humidity (operating)
Technical Specifications Memory Specifications The switch utilizes the following memory. Main Memory (SDRAM): 128 MB per switch Flash Memory: 32 MB Boot Flash: 512KB of 8-bit for system boot Compact Flash: 256 MB The centralized memory maximizes the overall switch throughput by guaranteeing full transmit and receive bandwidth to all Fibre Channel ports at all times.
Technical Specifications Serial Port Specifications Note: For dust and ESD (electrostatic discharge) protection, a cover is provided for the Serial port and should be kept on the port whenever the Serial port is not in use. The Serial port can be used to connect to a computer workstation to configure the switch IP address without connecting to the fabric.
Updating the Core Switch PID Format This Appendix provides detailed information for changing the Core Switch PID format. The SAN Switch 2/32 units ship with the Core Switch PID format set to 1. Before connecting to the SAN, you must verify that the Core Switch PID formats of all switches already running in the SAN are also set to 1.
Updating the Core Switch PID Format HP Recommendations on Changing the Core Switch PID Format Proactively setting the core PID format on all new fabrics before they enter production will prevent the need to update those fabrics in the future. This is strongly recommended as a step in the deployment of all new fabrics.
Updating the Core Switch PID Format How to Check the Current Core PID Setting for Switches Running Firmware Lower than V4.0.0 To view a switch’s current Core Switch PID format, connect directly to a switch in your SAN and complete the following steps via a telnet session or the Serial cable supplied.
Page 94
Updating the Core Switch PID Format devices on the first fabric to be updated. (This is the best practice in cases where any doubt exists about the multi-pathing software’s behavior, but is more labor intensive.) 3. Verify that I/O continues over the other fabric. 4.
Updating the Core Switch PID Format 10. For any devices manually bound by PID, update their bindings. This may involve changing them to the new PIDs, or may (preferably) involve changing to WWN binding. 11. For any devices automatically bound by PID, two options exist: a.
Page 96
Updating the Core Switch PID Format 5. One at a time, re-enable the switches in the updated fabric. In a core/edge network, enable the core switches first. 6. Once the fabric re-converges, type cfgEnable myZoningCfg, (where myZoningCfg is the name of your zone configuration). Press Enter to update zoning.
Updating the Core Switch PID Format HP/UX Procedure for Updating the Core Switch PID Format Use these procedures for updating the Core Switch PID format in an HP/UX environment. 1. Back up all data. Verify backups. 2. If you are not using multi-pathing software, stop all I/O going to all volumes connected through the switch/fabric to be updated.
Updating the Core Switch PID Format 14. Change to /dev and untar the file that was tared in step 4. For example: tar –xf /tmp/jbod.tar 15. Import the volume groups using vgimport. The proper usage would be vgimport –m <map file> <path to volume group> <physical volume path>. For example: vgimport –m /tmp/jbod_map /dev/jbod /dev/dsk/c64t8d0 /dev/dsk/c64t9d0...
Updating the Core Switch PID Format het46 (HP-50001)> ioscan -funC disk Class H/W Path Driver S/W State H/W Type Description ------------------------------------------------------------------------------------- disk 0/0/1/1.2.0 adisk CLAIMED DEVICE SEAGATE ST39204LC /dev/dsk/clt2d0 /dev/rdsk/c1t2d0 disk 0/0/2/1.2.0 adisk CLAIMED DEVICE DVD-ROM 304 /dev/dsk/c3t2d0 /dev/rdsk/c3t2d0 disk 319 0/4/0/0.1.2.255.14.8.0 adisk CLAIMED DEVICE...
Page 100
Updating the Core Switch PID Format 11. Issue the switchEnable command. Enable the core switches first, then the edge switches. 12. Rebuild the device entries for the affected fabric using the cfgmgr command. For example: cfgmgr -v This command may take several minutes to complete. 13.
The end user of this product should be aware that any changes or modifications made to this equipment without the approval of Hewlett-Packard could result in the product not meeting the Class A limits, in which case the FCC could void the user's authority to operate the equipment.
Regulatory Compliance Notices EMC Statement (Canada) This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. SAN Switch 2/32 Installation Guide...
Regulatory Compliance Notices EMC Statement (European Union) This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. SAN Switch 2/32 Installation Guide...
Regulatory Compliance Notices Laser Safety A. Certification and Classification Information When equipped with native Fibre Channel adapters, this product contains a laser internal to the small form factor pluggable (SFP) transceiver modules. In the USA, the SFP module is certified as a Class 1 Laser product, conforming to the requirements contained in Department Of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J.
Regulatory Compliance Notices Battery Replacement Notice Your switch is equipped with a lithium manganese dioxide, a vanadium pentoxide, or an alkaline internal battery or battery pack. There is a danger of explosion and risk of personal injury if the battery is incorrectly replaced or mistreated. Unless specific replacement instructions are provided as part of this guide, replacement is to be done by an HP authorized service provider using the HP spare designated for this product.
glossary Glossary This glossary defines terms used in this guide or related to this product and is not a comprehensive glossary of computer terms. Glossary AL_PA Arbitrated Loop Physical Address; a unique 8-bit value assigned during loop initialization to a port in an arbitrated loop. Alias Address Identifier An address identifier recognized by a port in addition to its standard identifier.
Page 112
Glossary Bandwidth The total transmission capacity of a cable, link, or system. Usually measured in bps (bits per second). May also refer to the range of transmission frequencies available to a network. See also Throughput. BB_Credit Buffer-to-buffer credit; the number of frames that can be transmitted to a directly connected recipient or within an arbitrated loop.
Page 113
Glossary Community (SNMP) A relationship between a group of SNMP managers and an SNMP agent, in which authentication, access control, and proxy characteristics are defined. See also SNMP. Connection Initiator A port that has originated a Class 1 dedicated connection and received a response from the recipient.
Page 114
Glossary EIA Rack A storage rack that meets the standards set by the Electronics Industry Association. Enabled Zone Configuration The currently enabled configuration of zones. Only one configuration can be enabled at a time. End-to-end Flow Control Governs flow of class 1 and 2 frames between N_Ports. See also EE_Credit. Error As applies to Fibre Channel, a missing or corrupted frame, time-out, loss of synchronization, or loss of signal (link errors).
Page 115
Glossary FL_Port Fabric Loop Port; a port that is able to transmit under fabric protocol and also has arbitrated loop capabilities. Can be used to connect an NL_Port to a switch. FLOGI Fabric Login; the process by which an N_Port determines whether a fabric is present, and if so, exchanges service parameters with it.
Page 116
Glossary GBps GigaBytes per second (1,062,500,000 bytes/second). Host Bus Adapter; the interface card between a server or workstation bus and the Fibre Channel network. A Fibre Channel wiring concentrator that collapses a loop topology into a physical star topology. Nodes are automatically added to the loop when active and removed when inactive.
Page 117
Glossary Loop Initialization Primitive; the signal used to begin initialization in a loop. Indicates either loop failure or resetting of a node. Looplet A set of devices connected in a loop to a port that is a member of another loop. Management Information Base;...
Page 118
Glossary Phantom Address An AL_PA value that is assigned to an device that is not physically in the loop. Also known as phantom AL_PA. A twenty-bit public address created for an 8-bit loop device to allow public devices to access it. Phantom Device A device that is not physically in an arbitrated loop, but is logically included through the use of a phantom address.
Page 119
Glossary Public Device A device that can log into the fabric and support 20-bit addresses (or has 20-bit phantom addresses created for it by the switch). Public Loop An arbitrated loop that includes a participating FL_Port, and may contain both public and private NL_Ports.
Page 120
Glossary Single Mode The fiber optic cabling standard that corresponds to distances of up to 10 km between devices. SNMP Simple Network Management Protocol. An internet management protocol that uses either IP for network-level functions and UDP for transport-level functions, or TCP/IP for both. Can be made available over other protocols, such as UDP/IP, because it does not rely on the underlying communication protocols.
Page 121
Glossary Transmission Character A 10-bit character encoded according to the rules of the 8B/10B algorithm. Transmission Word A group of four transmission characters. Trap (SNMP) The message sent by an SNMP agent to inform the SNMP management station of a critical error.
Page 122
Glossary Zone Configuration A specified set of zones. Enabling a configuration enables all zones in that configuration. Zone A set of devices and hosts attached to the same fabric and configured as being in the same zone. Devices and hosts within the same zone have access permission to others in the zone, but are not visible to any outside the zone.
index equipment symbols text symbols AC power cords cooling requirements audience authorized reseller, HP automatic self-discovery diagnostic tests about displaying the fabric wide device count back panel displaying the installed feature licenses description of displaying the system configuration settings document backing up configuration settings conventions batteries...
Page 124
Index description of compatible interfaces LEDs multiple switches front rack mount brackets network addresses getting help network addressing hardware features outer slide rails help, obtaining authorized reseller physical dimensions of switch storage website port technical support configurable types Hyperterminal 48, serial port speed port settings...
Page 125
Index requirements switch cooling physical dimensions environmental weight power switch location requirements shock and vibration symbols in text temperature and humidity symbols on equipment restoring restoring switch firmware restoring the system configuration settings technical support, HP RS-232 port telnet rubber feet temperature, requirements rubber mounting feet tests, diagnostic...
Page 126
Index SAN Switch 2/32 Installation Guide...