7 Installation best practices and procedures
This section provides an overview of the best practices and steps required to install a BladeSystem
enclosure with external SAS storage; details are not included in the scope of this document. For
details, see the setup and installation instructions provided with each device. User documents for
devices in this solution are available on the HP Manuals website
manuals
and on the device websites:
BladeSystem Technical Resources website:
documentation
P2000 G3 SAS MSA Array website:
Drivers > Manuals
Tape Storage & Media website:
or Tape Autoloaders)
NOTE:
While installing this solution, record device and system information in
(page
66). This information is used in later installation or configuration steps, and will be helpful
for troubleshooting and support purposes.
(under the Installing tab)
http://www.hp.com/go/tape
http://www.hp.com/go/bladesystem/
http://www.hp.com/go/P2000
http://www.hp.com/support/
(under HP Support &
(under Business Class Libraries
"Device worksheets"
39