Table of Contents
Advertisement
Installing the Mondi into the Navigation Car Kit
Mondi comes with a Car Kit that allows you to mount the device
onto a car's windshield. This is useful when using the Mondi's
Route66™ application to receive (call out/display) driving
directions. The kit consists of a Car Cradle and Suction Holder.
Important!: The cradle and suction holder must first be installed onto your
windshield prior to mounting the Mondi onto it. The Mondi must
rest in the cradle in the proper orientation to prevent it from
falling out during different driving conditions.
The Suction Holder can be bent (1) to adjust it for proper
1.
mounting to a windshield and the correct angle for support
of the Mondi.
Suction Cup Release
Suction Cup
Cradle Connector
In a single motion, insert the bottom of the Car Cradle into
2.
the base of the cradle connector (2).
Push the top towards the cradle connector and snap it into
3.
place (3). This secures the Cradle to the Suction Holder.
Suction Holder
Cradle
Clasp
Mondi
Introduction
12
Advertisement
Table of Contents
