HP D5970A - NetServer - LCII Installation And User Manual page 82

Chapter 4
Expand Array - Re-stripes data in the array across additional, un-
configured drives to expand the capacity of the array. Refer to the section
"Special Features in Manual Configuration" later in this chapter.
Open New Configuration (for example), as shown in Figure 4-40:
Figure 4-40. Selecting New Configuration
Disk Arrays Tab (New Configuration)
The Disk Arrays tab in Manual Configuration is where you begin to configure the
unused disk drives (lower left, Figure 4-41). Each disk array is represented by one
line in the Disk Arrays area of the dialog box (upper left, Figure 4-41). Logical
drives (if any have already been configured) appear on the right side.
76
Configuration