Step 4-Reassembling The Workstation; Step 5-Setting Up The Operating System; Japanese 日本語 - HP Z600 - Workstation - 6 GB RAM Installation Manual

Step 4—Reassembling the workstation
1. Reinstall the front bezel, if applicable.
2. Reinstall the card support, if applicable.
3. Reinstall the airflow guide, if applicable.
4. Reinstall the side access panel.
5. Reconnect power to the workstation and all external devices.
6. Restore power to the workstation and all external devices.
Step 5—Setting up the operating system
When powering up the workstation after installation, a new hard drive identifies itself as un-initialized
storage. Consult the operating system documentation for information about how to set up the new drive.
If hard drives are connected to a RAID device, see the RAID documentation for additional setup
information.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then
select your workstation product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。http://www.hp.com/support/workstation_manuals
にアクセスし、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニ
ューから Japanese を選択してください。
8 HP Optical Bay Hard Drive Bracket ENWW