Table 6. Power Agenda* (continued)
Policy settings
Name
Action
40
Power ManagerDeployment Guide
Description
Specifies the name of the power agenda to be deployed
to client computers.
If you enable this policy setting, you can input a specific
name or leave it blank for this power agenda.
Note: The name should contain no more than 32
single-byte characters or 16 double-byte characters.
Specifies the actions that this power agenda will perform.
The possible actions include:
• Change sleep timer (For Windows Vista/7)
or Sleep (For Windows XP)
• Change hibernation timer (For Windows Vista/7)
or Hibernate (For Windows XP)
• Change monitor off timer
• Shut down
• Switch to a Power Plan (For Windows Vista/7)
or Switch to a Power Scheme (For Windows XP)
• Set Monitor Brightness
• Peak power scheduler
Notes:
1. This policy setting is mandatory. If you enable this
policy setting, you should select one action.
2. Each action is related to the following corresponding
policy settings. If the policy setting that relates to the
action is undefined or disabled, the default value will
be applied or the power agenda will not be deployed.
• All actions
– Name policy setting
– Run policy setting
–
Configuration policy setting
– Days of week policy setting
–
Frequency policy setting
–
Notify policy setting
• Switch to a Power Plan (For Windows Vista/7)
or Switch to a Power Scheme (For Windows XP)
– Power Plan policy setting (For Windows Vista/7)
or Power Scheme policy setting (For Windows
XP)
– Time policy setting
• Change sleep timer, Change hibernation timer, and
Change monitor off timer (For Windows Vista/7)
or Sleep, Hibernate and Change monitor off timer
(For Windows XP)