Glossary; Glossary Of Terms - HP Designjet 3D User Manual

Glossary

Glossary of terms

Cleaning agent bag
A package containing the chemical substances used to activate dissolving support material from
models produced with HP Designjet 3D printers.
Cycle length
The time required for one complete cleaning cycle. Users may choose between short, medium,
or long cycle lengths.
Model bag
A flexible mesh device used to hold models securely in place within the Model Basket. Used for
delicate or flat parts.
Model basket
An open grid metal container used to hold models during the support removal process. Allows
for circulation of water and cleaning agent to facilitate support removal from models produced
with HP Designjet 3D printers.
Strainer
A filter to prevent larger pieces of waste materials from passing into the drain outlet.
Tank Level/Tank Load
The amount of water added to the HP Designjet 3D Removal System to fully submerge the
models being cleaned. Users may choose either Half or Full tank levels.
26 Chapter Glossary