HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 121

Indicates the current IPX/SPX protocol status.
Status
An error code and message
[This line appears here only for the 175x
Node Name
For the 310x, this line appears
The IPX/SPX name of the print server. The default name is NPIxxxxxx,
where xxxxxx is the last six digits of the LAN hardware (MAC) address.
Specifies the frame type selection on the print server.
Primary
Frame
Type
The first column "Network" indicates the network number associated with
Network
each protocol frame type used for communication between a server and the
print server.
The second column "Frame Type" identifies the frame type associated with
Frame
each network number.
Type
EN_II
Unless a specific frame type has been manually configured, the print server
EN_802.2
automatically determines the protocol frame type by listening to the network
EN_SNAP
data being transferred over the network.
EN_802.3
The third column "Rcvd" indicates how many packets have been received for
Rcvd
each frame type.
Back to Top
Novell/NetWare Protocol Information
Provides the current status and parameter values for the Novell NetWare network protocol.
This section appears only for the 310x.
Message
Ready the print server is awaiting data over IPX/SPX.
Disabled IPX/SPX was manually disabled.
Initializing the print server is registering the node address or
name. An additional status message may also be displayed.
are displayed if the print server is not ready.
Auto Select the print server automatically senses and limits the
frame type to the first one detected.
EN_II limits the frame type to IPX over Ethernet frames. All others
will be counted and discarded.
EN_802.2 limits the frame type to IPX over IEEE 802.2 with IEEE
802.3 frames. All others will be counted and discarded.
EN_SNAP limits the frame type to IPX over SNAP with IEEE 802.3
frames. All others will be counted and discarded.
EN_802.3 limits the frame type to IPX over IEEE 802.3 frames. All
others will be counted and discarded.
Unknown the print server is still trying to determine which network
number to use.
Disabled a specific frame type for that network has been manually
configured.
in the Novell/NetWare section
Description
instead.]