Yamaha disklavier DKC-850 Function Manual page 13

■ Setting the MAC Address
If you find it too inconvenient to have to enter a passcode each time you
access the Disklavier from an external remote controller, you can set the
MAC address of the external remote controller. This will allow the external
remote controller with the registered MAC address to access your
Disklavier without entering the passcode.
1
With the passcode properly set, press [
"MAdr1."
2
Enter the address with [+/YES], [–/NO], and the cursor
buttons ([ ] [
Enter an address with [+/YES] and [–/NO], and move the cursor with
the cursor buttons ([
+
You can set up to three addresses.
To set the second and third address, press [
parameter.
3
Press [ENTER] to complete the operation.
English
?=]-+
=Passcode=
>Passcode=1234
>MAdr1=##:##:##:##:##:##
]).
] [ ]).
=Passcode=
>Passcode=1234
>MAdr1=01:AB:23:C#:##:##
] to select
_?=]-+
] and select the
Other Settings
Note:
You can also use the dial on the
control unit to enter the address.
13