HP Vectra VL6 8 Installation Manual page 11

3 Connecting to a Windows NT 3.51 Server
Windows for Requirements
Workgroups
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04.
• Driver Name for Vectra VL8 and VL7: IBMMPC.DOS Size: 60KB Date: 4/
• Driver Name for Vectra VE7/VE8: Streamer.386 Size:85KB Date: 09/13/
• Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/
• Netware client for DOS and MS-Windows.
Device Configuration
I/O Address
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
2 Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI
3 After the machine boots, verify that the adapter finished testing and that
4 Click on "F3" to exit, and then press "CTRL+ALT+DEL."
5 After windows loads, open the "NETWORK" folder, and double-click the
6 Select "Networks" and choose "Install Microsoft Windows Network" and
4/97.
96.
SPX, and NWLink NetBIOS transfer protocols.
Vectra VL8
Interrupt 11
F800-h
adapter card into a PCI slot.
Diagnostic Disk) and power on the machine.
the adapter is "OK."
"NETWORK SETUP" icon.
click on "OK."
3 Connecting to a Windows NT 3.51 Server
Vectra VL7 Vectra VE7/VE8
11(10) 10(11)
C800h DC00-h
Windows for Workgroups