Yamaha mLAN Mixer Owner's Manual page 28

DELAY+REV
Parameter
DELAY L 0.0–1000.0 ms
FB.GAIN –99 to +99%
DELAY R 0.0–1000.0 ms
DLY HI 0.1–1.0
FB.DLY 0.0–1000.0 ms
DLY/REV 0–100%
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
REV HI 0.1–1.0
DENSITY 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
DELAY->REV
Parameter
DELAY L 0.0–1000.0 ms
FB.GAIN –99 to +99%
DELAY R 0.0–1000.0 ms
DLY HI 0.1–1.0
FB.DLY 0.0–1000.0 ms
DLY BAL 0–100%
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
REV HI 0.1–1.0
DENSITY 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
DIST->DELAY
Parameter
DST1, DST2, OVD1, OVD2,
DST TYPE
CRUNCH
DRIVE 0–100
MASTER 0–100
TONE –10 to +10
DLY BAL 0–100%
DELAY 0.0–2725.0 ms
FB.GAIN –99 to +99%
HI.RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
Range
Left channel delay time
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Right channel delay time
Delay high-frequency feedback ratio
Feedback delay time
Delay and reverb balance (0% = reverb, 100% = delay)
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Range
Left channel delay time
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Right channel delay time
Delay high-frequency feedback ratio
Feedback delay time
Delay and delayed reverb balance (0% = delayed reverb, 100% = delay)
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Range
Distortion type (DST = distortion, OVD = overdrive)
Distortion drive
Master volume
Tone control
Distortion and delay balance (0% = distortion, 100% = delayed distortion)
Delay time
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Modulation depth
Description
Description
Description
28