Cooling Your Room - Samsung AWT24A7ME Owner's Instructions Manual

Cooling Your Room

Remote Control
Control Panel
POWER
Hr. C
HIGH
FAN SPEED
8
E-
You must select the Cool mode if you wish to lower the temperature
in your room. You can also set the fan speed.
1
If necessary, press the
Result:
2
If the COOL indicator is not lit up on the unit:
Result:
3
To adjust the temperature, press the
control one or more times until the required temperature is displayed.
To adjust the temperature, press the TEMPERATURE button on the unit
one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
TEMP.
4 To set the fan speed to...
High
LOW
Low
Result:
5 To control the direction of the air flow, refer to page 10.
(On/Off) button.
The operating mode indicator (COOL or FAN) on the
unit comes on.
The air conditioner starts up in the mode selected
when the unit was last used.
The unit beeps twice.
The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
Plugged in
Stopped
It will start up automatically after a three-minute rest period.
Press the button on the remote control
or
Press the MODE button on the unit one or more times until the COOL
indicator lights up
The unit beeps each time you press MODE.
The air conditioner starts up in Cool mode.
You can change modes at any time.
24°C --> 25°C --> .... --> 29°C --> 30°C --> 18°C --> 19°C --> ....
Each time you press the temperature buttons:
– The temperature is adjusted by 1°C and
displayed on the control panel
– The unit beeps
The air conditioner starts cooling if the room temperature
is higher than the selected temperature.
Then...
Press the
Press the
Each time you press a button, the unit beeps.
or buttons on the remote
button on the remote control.
button on the remote control.