Checking The Program - Kenwood DV-4070 User Manual

Checking the program

Set the mode switch of the joystick remote to the Purple position
¡
and press
C
CHECK
¶ Press each button within 8 seconds after pressing the previous
button.
¶ The program list is displayed on the TV screen. When a
program number is selected by tilting the joystick up or down
and the ENTER button is pressed, program playback starts
from the selected program number. The contents of the
program numbers are also shown on the player display. (A
program number can also be selected by pressing the CHECK
button to move the cursor in the program list.)
¶ When 17 or more tracks are programmed, the program list
is displayed in more than one page. In this case, when the
cursor is located on the bottom edge, tilting the joystick
downward makes it possible to advance to the next page.
(When the cursor is located on the top edge, tilting the cursor
upward makes it possible to return to the previous page.)
70
during program playback.
Program Playback
DVF-R9030