Table of Contents
Advertisement
From the Home screen, touch
Developer options screen, touch USB debugging to
enable or disable the setting. When enabled, a check
mark displays in the check box.
Development device ID
The identification number for your device when using it as a
development tool displays in this field.
Allow mock locations
This setting is used by developers when developing
location-based applications.
From the Home screen, touch
Developer options screen, touch Allow mock locations
to enable or disable the setting.
Desktop backup password
Protect the desktop with a backup password ID.
1. From the Home screen, touch
Developer options screen, touch Desktop backup
password.
2. In the Settings screen, enter the current full backup
password, the new password for full backups, then
enter the new password again.
Menu
Settings
Menu
Settings
Menu
Settings
3. Touch Set backup password to save the password
change.
User interface
Configure the user interface by setting the behavior for the
way the screen behaves when using applications or
displaying data.
From the Home screen, touch
Developer options screen, under User interface, touch
the check box next to each of the following options to
enable it. (When enabled, a check mark displays in the
check box.)
• Strict mode: The screen flashes when applications perform
long operations on the main thread.
• Show pointer location: Highlights the data that was touched
on the screen.
• Show touches: Displays touch interactions on the screen.
• Show screen updates: Areas of the screen flash when they
update.
• Show CPU usage: Screen highlights the current CPU usage.
• Force GPU rendering: Uses a 2D acceleration in applications.
• Window animation scale: Configure the scale for animation
(ranges from off to 10x).
Menu
Settings
Settings
164
Advertisement
Table of Contents
