Canon 2921B002 On-Screen Manual page 647

Changing the Machine Settings on the LCD
Connection
SSID
BSSID
Communication
mode
Channel
Data encryption
Network
authentication
IP address
Subnet mask
Subnet prefix
length
Default gateway
MAC address
WEP bit
Destination
IPsec Settings
Security protocol
Pre-shared key
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
Wired LAN setting list
The list of wired LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items
Connection
IP address
Subnet mask
Subnet prefix length
Default gateway
MAC address
IPsec Settings
Security protocol
Pre-shared key
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
IPv4/IPv6 setting
Selects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.
WSD setting
Activates/inactivates the WSD (one of the network protocols supported in Windows Vista)
setting.
Note
When you set WSD setting to Active, the printer icon is displayed on the Network Explorer
in Windows Vista.
Reset LAN settings
Initializes the network settings on the machine.
Important
Note that initialization erases all connection settings with computers, and printing or
Active/Inactive
XXXXXXXXXXX
XX:XX:XX:XX
Infrastructure
XX
Disable/WEP/TKIP/AES
Auto/Open system/Shared key/WPA
-PSK/WPA2-PSK
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
-
XXX. XXX. XXX. XXX
XX:XX:XX:XX:XX:XX
128, 64
XX
-
-
-
Setting (IPv4)
Active/Inactive
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
-
XXX. XXX. XXX. XXX
XX:XX:XX:XX:XX:XX
-
-
-
Active/Inactive
XXXXXXXXXXX
XX:XX:XX:XX:XX:XX
Infrastructure
XX
Disable/WEP/TKIP/AES
Auto/Open system/Shared key/WPA
-PSK/WPA2-PSK
XXX. XXX. XXX. XXX.
XXX. XXX. XXX. XXX
-
XXX
XXX. XXX. XXX. XXX
XX:XX:XX:XX:XX:XX
128, 64
XX
Active/Inactive
ESP/ESP & AH/AH
XXXXXXXXXXX
Setting (IPv6)
Active/Inactive
XXX. XXX. XXX. XXX.
XXX. XXX. XXX. XXX
-
XXX
XXX. XXX. XXX. XXX
XX:XX:XX:XX:XX:XX
Active/Inactive
ESP/ESP & AH/AH
XXXXXXXXXXX
Page 647 of 815 pages