Setting An Unlock Pattern - Samsung SGH-T999MBATMB User Manual

Samsung galaxy s iii (t-mobile), pebble blue
Hide thumbs Also See for SGH-T999MBATMB:
Table of Contents

Advertisement

5. Once prompted to speak and unlock command, tap
and repeat the phrase four times.
6. Once complete, tap Done.

Setting an Unlock Pattern

Creating a screen unlock pattern increases security on the
phone. When you enable the User visible pattern field, you
will draw an unlock pattern on the screen whenever you
want to unlock the phone's buttons or touch screen. When
you activate the User tactile feedback field, you feel vibration
as feedback while drawing the pattern.
The feature is now paired with a backup PIN code that acts
as a backup to the pattern lock. If you forget your pattern,
you can regain access to the device by entering a PIN code.
Note: Make sure the Require Pattern field is activated.
1. Press
and lock screen.
2. Tap Screen lock
3. Read the instructions then tap Next.
296
and then tap Settings
Pattern.
4. Review the on-screen animation procedure for drawing
a pattern and tap Next when you are ready to draw a
pattern.
5. Draw your pattern by touching your first on-screen
point. Then, without removing your finger from the
screen, drag your finger over adjacent points until the
gray trace line overlaps each point and they are
highlighted with a green circle.
6. When you have connected at least four dots in a
vertical, horizontal or diagonal direction, lift your finger
from the screen and tap Continue.
7. Confirm the new pattern by redrawing it and then
tapping Confirm. The Unlock pattern is set.
8. Enter the backup PIN code and tap Continue.
9. Reenter the PIN to reconfirm the previous entry and
Security
tap OK.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Galaxy s iii

Table of Contents