Installation flow of the hardware
We recommend you refer to the below installation flow to install the hardware.
Set installation location and check included items in the package.
Remove all the packing pads and tapes.
Install the machine with the one of the purchased items
: Cabinet Stand, Dual Cassette Feeder, or High Capacity Feeder.
Install the Duplicate Automatic Document Feeder(DADF).
Do you need to install the Right Output Tray?
Install Toner Cartridges and Imaging Units.
Do you need to install the Standard finisher or the Booklet finisher?
Do you need to install other option items?
Load paper into the trays of the machine.
Connect a printer cable to the machine.
Connect a power cord to the machine and turn on the power.
Set the initial setting and test the machine.
Explain to customer how to use the machine.
Yes
Install the Right Output Tray.
Yes
Install the Bridge kit.
Install the Finisher.
Yes
Install purchased other option items.
Setting up the hardware_ 10
No
No
No