Raid - D-Link DNS-323 - Network Storage Enclosure NAS Server User Manual

Section 3 - Configuration
The DNS-323 supports four different disk configuration types: Standard, where each drive is a unique volume, JBOD,
which combines both drives in a linear fashion to create one volume, as well as RAID 0 and RAID 1.
When RAID 1 is used, the DNS-323 supports both Auto Rebuild and Manual Rebuild. Manual Rebuild is now the default
(in earlier versions of the DNS-323, Auto Rebuild was the default). Auto Rebuild allows a degraded RAID 1 array to
be automatically rebuilt when a failed hard drive is replaced by restoring data from the existing hard drive to the newly
inserted hard drive. Please note that rebuilding will erase all data on the newly inserted drive.
Click Set RAID Type and Re-Format to change the
current drive configuration.
The DNS-323 allows you to change the drive
configuration from Standard to RAID 1, without losing
any data
D-Link DNS-33 User Manual

RAID