HP D5063H - Pavilion F50 - 15" LCD Monitor User Manual page 18

Adjusting the "OSD Display"
Submenu
To adjust the OSD H and V, positions you should
follow the steps below:
1 Bring-up the OSD "Main Menu".
2 Use the '+' or '—' button to move (forward or
backward) to the OSD display icon and
highlight it.
3 Use 'Select' button to enter the "OSD Display"
submenu. It will show two items for your further
adjustment.
If 'H. Position' is selected, you may use the '+' or
'—' buttons to adjust the setting of H. position of
the OSD display. The fullness of the graphic bar as
well as the numerical value at the right corner is
changed accordingly.
If 'V. Position' is selected, you may use the '+' or
'—' buttons to adjust the setting of V. position of
the OSD display. The fullness of the graphic bar as
well as the numerical value at the right corner is
changed accordingly.
14
user's guide
If 'Exit' is selected, it will exit the "OSD Display"
submenu and go back to the "Main Menu".
Adjusting the Factory Recall
To recall factory settings back you should follow the
steps below:
1 Bring-up the OSD "Main Menu".
2 Use the '+' or '—' button to move (forward
or backward) to the factory recall icon and
highlight it.
3 Press the 'Select' button to activate the factory
recall action.