Summary of Contents for JVC LM-150U - 15" LCD Monitor
Page 1
LCD DISPLAY MONITOR BEDIENUNGSANLEITUNG: LCD-DISPLAYMONITOR MANUEL D’INSTRUCTIONS: MONITEUR LCD ISTRUZIONI: SCHERMO A CRISTALLI LIQUIDI MANUAL DE INSTRUCCIONES: MONITOR PANTALLA LCD INSTRUCTIONS LM-170A LM-150A The illustration of the monitor is of LM-170A. Die Abbildung des Monitors zeigt das Modell LM-170A. Les illustrations du moniteur sont du LM-170A. L’illustrazione del monitor si riferisce al modello LM-170A.
Page 2
Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technology Centre Europe GmbH Postfach 10 05 52 61145 Friedberg Germany Sehr geehrter Kunde, sehr geehrte Kundin, dieses Gerät stimmt mit den gültigen europäischen Richtlinien und Normen bezüglich elektromagnetischer...
Page 3
LCD DISPLAY MONITOR INSTRUCTIONS LM-170A LM-150A The illustration of the monitor is of LM-170A.
• All operating instructions should be followed. FCC NOTICE (U.S.A. only) CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 5
POWER CONNECTION The power supply voltage rating of this product is AC 100 – 240 V. The power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure safety and EMC regulations of each countries. For U.S.A.
Page 6
Safety Precautions (cont.) • Make enough room for inserting or removing the Do not attempt to service this product yourself, as power plug. Place the product as close to the opening or removing covers may expose you to outlet as possible. The main power supply for the dangerous voltages and other hazards.
Page 7
• Never push objects of any kind into this product Under the following conditions, through openings as they may touch dangerous 1. Turn off the power. voltage points or short out parts that could result 2. Unplug this product from the wall outlet. in a fire or electric shock.
Union. national legislation. (Business users) If you wish to dispose of this product, please visit our web page www.jvc-europe.com to obtain information about the take-back of the product. [Other Countries outside the European Union] If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.
Contents Safety Precautions ............2 IMPORTANT SAFEGUARDS ........2 Maintenance ............. 6 Controls and Features ..........8 Front panel ............... 8 Rear panel .............. 10 Installation ..............11 Using the monitor on the stand ....... 11 Installing the monitor on the wall ......12 Installing the monitor on the rack ......
Controls and Features Front panel The illustration of the monitor is of LM-170A. 1 Speaker (Monaural) (LM-170A only) 5 Volume control button (LM-170A only)* Outputs the audio signal of the selected input. While the menu is not displayed, adjust the volume level (00 to 50) by NOTE: pushing the button left or right.
Page 11
The illustration of the monitor is of LM-170A. 8 INPUT SELECT buttons/lamps 7 About the status display Select an input to display. When “STATUS DISPLAY” is set to “ON” ( page VIDEO 1: Selects the video signal input to the 16), the status (information of the current input VIDEO 1 terminal.
Controls and Features (cont.) Rear panel The illustration of the monitor is of LM-170A. 1 AC inlet 3 REMOTE (external control) terminal (MAKE/ Power input connector. Connect the provided AC TRIGGER) power cord to an AC outlet (AC 120 V/AC 220 - 240 Terminals for controlling the monitor by an external V, 50 Hz/60 Hz).
Installation NOTE: • Do not rest your arm on the monitor or lean against the monitor. • Do not hold the LCD panel when installing the monitor. • Make sure to install the monitor securely to prevent the monitor from falling over, which causes damage to the monitor or injury. •...
(See page 21 for the specifications of the mounting holes.) Installing the monitor on the rack Use a JVC’s RACK MOUNT ADAPTER (RK-C157L1G; not supplied). NOTE: • Detach the stand first. (+ page 11) • Ask your dealer to install.
How to Use the MAIN MENU The MAIN MENU contains the functions for daily use. MAIN MENU Select Adjust When analog RGB signals are input from the computer Select “AUTO ADJ.” Operation guide Shows the buttons for Perform “AUTO each operation. ADJ.”...
How to Use the SET-UP MENU The SET-UP MENU contains the initial settings of the monitor. SET-UP MENU 7 PICTURE SUB ADJ. Select Select Adjust Press CHROMA/ Next PHASE while Select pressing MENU. “reset” Operation guide Shows the buttons for each operation.
SET-UP MENU items PICTURE SUB ADJ. Sets the standard level for the picture adjustments by using the CHROMA/PHASE and CONTRAST/BRIGHT buttons on the front panel. CONTRAST* Adjusts the standard level for contrast adjustment. –20 - 00 - +20 BRIGHT* Adjusts the standard level for brightness adjustment. –20 - 00 - +20 CHROMA* Adjusts the standard level for chroma adjustment.
Page 18
How to Use the SET-UP MENU (cont.) REMOTE SYSTEM Selects the external control system of the MAKE/TRIGGER terminal. Setting value: MAKE (make contact system), TRIG. (trigger system) NO SYNC FUNCTION Selects the screen status when no signal is being input. NO SYNC DISPLAY Sets the screen status when no signal is being input.
How to Use the External Control About the external control The monitor has the MAKE/TRIGGER terminal, which allows you to control the monitor by the MAKE (make contact) or TRIG. (trigger) system. MAKE (make contact) system: Controls the function by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it.
Troubleshooting Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Reference Problems Points to be checked...
Page 21
Reference Problems Points to be checked Measures (Remedy) pages Wrong picture Has the picture position or size been Adjust the picture size (H. SIZE/V. SIZE) or position, wrong changed? position (H. POSI./V. POSI.) in “SIZE/POSI. picture size ADJ.” in the SET-UP MENU. 13, 15 When analog RGB signals are input from the computer, perform “AUTO ADJ.”...
Specifications Model LM-170A LM-150A Type LCD Display Monitor LCD panel 17”, active matrix TFT 15”, active matrix TFT Effective Screen Size Width: 337.9 mm (13 1/4”) Width: 304.1 mm (11 15/16”) Height: 270.3 mm (10 5/8”) Height: 228.1 mm (8 15/16”) Number of Pixels Displayed 1280 x 1024 1024 x 768...
7 Dimensions Unit : mm (inch) LM-170A Front View Side View Rear View (without the stand) 70.5 (2 7/8) 374 (14 3/4) 28.5 (1 1/8) VESA mounting holes 184 (7 1/4) 280 (11 1/8) (Size: M4, depth: 10 mm) * at the higher position ** at the lower position LM-150A Front View...
Specifications (cont.) Specification of the DVI-D terminal Pin No. Input signal Pin No. Input signal Pin No. Input signal T.M.D.S Data 2– T.M.D.S Data 1– T.M.D.S Data 0– T.M.D.S Data 2+ T.M.D.S Data 1+ T.M.D.S Data 0+ T.M.D.S Data 2/4 shield T.M.D.S Data 1/3 shield T.M.D.S Data 0/5 shield DDC Clock...