Table of Contents
Advertisement
LED Indicator
The LED indicator on the front of the phone displays when
the phone is locked, to notify you of status changes and
events. Use LED indicator settings to configure how the LED
functions.
1. From the Settings screen, under Device, touch LED
Indicator. The LED Indicator screen appears.
2. Touch the following options to enable or disable them.
(When enabled, a check mark appears in the check
box.):
• Charging: When enabled, the LED glows red during charging,
and green when the battery is fully charged.
• Low battery: When enabled, the LED blinks red to indicate low
battery charge.
• Missed event: When enabled, the LED blinks orange to show
that you have missed calls, new messages, or application
events.
150
Motion
Motion lets you control a number of your phone's functions
by moving your hand or finger across the screen in a
particular pattern or by moving the phone itself in a particular
way.
Note: For more information about using Motion, see "Motions"
on page 24.
1. From the Settings screen, under Device, touch Motion.
The Motion screen appears.
2. Touch Motion activation to enable/disable your phone's
ability to recognize active gestures. (When this option
is enabled, a check mark appears in the check box.)
3. Configure motion options by touching the
setting to enable them, or touching the
setting to disable them:
• Direct call: When enabled, you can lift the phone to your ear
while viewing a contact to dial the contact's phone number.
• Smart alert: When enabled, the phone will automatically notify
you to missed calls and alerts that occurred while the phone
was stationary.
Advertisement
Table of Contents
