Epson AcuLaser CX16 Reference Manual page 103

Item
Apply button
Clear button
SNMP
The Network - SNMP window allows you to configure the following items:
Item
SNMP
SNMP V1//V2c
Apply button
Description
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
SNMP V1//V2c Select whether or not SNMP V1//V2c is used.
Choices
Default
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SNMP
UDP Port Specify the UDP port number.
Range
Default
Note:
The currently used port number and numbers 80, 427, 515, 631, 9100
and 4567 cannot be specified.
Read Community Specify the read community name for SNMP.
Name
Range
Default
Write Specify whether or not writing is permitted with SNMP.
Choices
Default
Write Community Specify the write community name.
Name
Range
Default
Applies the configuration settings for this window.
AcuLaser CX16NF
Enable, Disable
Enable
1 to 65535
161
Up to 15 characters
Public
Enable, Disable
Enable
Up to 15 characters
private
Using Web-Based EpsonNet Config
Reference Guide
103