Attaching the Spacer for Borderless Printing
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on
the Roll Holder.
Insert the protrusions (b) of the Spacer for Borderless Printing (a) into the holes (c) of the Roll Holder, as
shown.
Important
•
If you use an A1 or A2 roll for borderless printing, be sure to attach the provided Spacer for Borderless
Printing on the Roll Holder. If you do not attach the Spacer for Borderless Printing on the Roll Holder, an
error message will be displayed and printing is not possible.
Removing the Spacer for Borderless Printing
Pull out the Spacer for Borderless Printing from the Roll Holder, as shown.
Handling rolls
Handling Paper 145