Epson 7880 - Stylus Pro Color Inkjet Printer Manual page 7

3. Raise the ink levers to the unlocked position.
4. Remove the expended ink cartridge from the printer. It's a
good idea to save your first set of expended cartridges so you
can use them for transporting the printer, if necessary.
Warning:
Do not shake the expended cartridge, or ink may leak out. If ink
gets on your hands, wash them thoroughly with soap and water.
If ink gets in your eyes, flush them immediately with water.
5. Make sure the replacement cartridge is the correct color and
remove it from its package.
7 - Epson Stylus Pro 7880/9880
6. Gently shake the cartridge well before installing it.
7. Hold the cartridge with the arrow pointing toward the
printer. Then insert the cartridge into the slot. Don't force
it in.
Note:
If you can't insert the cartridge smoothly, you may have the
wrong cartridge. Check the package and product code. If the
B Ink light remains on after installing the cartridge, it may not be
inserted fully.
Caution:
Do not remove and re-insert cartridges more often than
necessary. Doing so can compromise the needle valve seal and
allow air to enter the ink tubes, causing nozzle damage.
8. Lower the ink levers to their locked position.
9. Close the ink compartment covers.
10/07
Epson Stylus Pro 7880/9880