The necessary components are now installed. Go to the section "Connecting the Network
Interface to the Network" on page 21.
Windows XP
For Windows XP, use the following procedure to install the necessary components.
1. Click Start, highlight Control Panel, and then click Network and Internet
Connections. Select Network Connections.
2. Under LAN or High-Speed Internet, click the Local Area Connection icon.
3. Under Network Tasks, click Change settings of this connection.
4. Check if the following necessary components are in the list. If they are already installed,
go to the next chapter.
The following table lists the components required for configuring the network interface
with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP, SNMP (IP trap)
MS Network
Necessary components
Internet Protocol (TCP/IP)
Internet Protocol (TCP/IP)
16
How To