Snapclonediskdevice - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

Write Cache Mode. Select the write cache mode for the storage volume. Choices are
write_cache_enabled, and write_cache_disabled.
Examples
SetWriteCacheModesUsingRepository ( "\\HostA2\Catalog 20051214.021405", REPLICATED,
WRITE_CACHE_ENABLED )
Comments
• Associated validation commands. None
• Agent and license prerequisites. Requires a host agent. Requires an Oracle-integration license.
• Command result value. None. For a complete list, see
• OS specifics. None
• The repository must already exist or be created by a previous step in the same job.
• See resource names and UNC

SnapcloneDiskDevice

Creates a snapclone (a point-in-time copy) of the virtual disk that underlies a host disk device (raw disk).
The snapclone copy (virtual disk) is presented to the enabled host and a host bus scan is performed to
identify the presented storage.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SnapcloneDiskDevice ( %host_storvol_unc_name%, "", SAME, %new_storvol_name%, WAIT )
Host Storage Volume UNC Name (%host_storvol_unc_name%). Select or enter the UNC name of the
host disk device to be copied.
Disk Group UNC Name. Select or enter the UNC name of the storage disk group in which the snapclone
copy is to be created.
RAID Level. elect the redundancy level for the copy. Choices are RAID0, RAID1, RAID5, and same. See
virtual disks redundancy level.
New Virtual Disk Name (%new_storvol_name%). Enter a name for the copy.
Wait for Discovery. Select wait or nowait. See jobs
Examples
These examples show host volume mount points. Device names can also be used.
command result
formats.
wait/nowait
HP StorageWorks Replication Solutions Manager 4.0.1
values.
argument.
157