Removing Virtual Disks From A Managed Set; Removing Virtual Disks From A Dr Group Pair - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual
Hp storageworks replication solutions manager 4.0.1 user guide (t3680-96308, june 2008)
Hide thumbs
Also See for 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure:
- Command reference manual (207 pages) ,
- Maintenance and service manual (63 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
•
You can allow storage controller software to assign a LUN. See
CAUTION:
Presenting a virtual disk to more than one host at a time can cause I/O write conflicts on the disk
and the possible loss of host application data.
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Virtual Disks.
2.
On the List tab, select the virtual disk you want to present to an enabled host.
3.
Select Actions > Add Presentation. The Add Presentations window opens. Follow the instructions
in the window.
Removing virtual disks from a managed set
Remove virtual disks from a managed set.
Considerations
•
You can use the GUI or the CLUI. See storage systems
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Virtual Disks.
2.
On the List tab, select the virtual disks to remove from a managed set.
3.
Select Actions > Remove From Managed Set. The Select Managed Sets window opens.
4.
Select the managed set from which to remove the virtual disks.
5.
Click OK. The virtual disks are removed from the set.
Removing virtual disks from a DR group pair
Remove virtual disks from a DR group pair. See
When you remove virtual disks from a source DR group, the source disks are retained. You can discard
or retain the remote copies (virtual disks).
Considerations
•
You can use the GUI or CLUI. See virtual disks
•
Guidelines apply. See virtual disks
•
To remove virtual disks from a DR group pair, you must specify virtual disks in the source DR
group. See
•
You cannot directly remove virtual disks from a destination DR group.
•
If you choose to discard the remote copies when the remote link is not operational, the remote
virtual disks are not deleted. You will need to manually delete them.
•
You cannot remove virtual disks from a DR group pair if remote replication is suspended. See
DR group
•
You cannot remove a virtual disk from a DR group if its remote copy is presented. You must first
unpresent the remote copy.
424
Virtual disks
DR group
pair.
suspension
state.
Procedure
actions cross
DR group
pair.
actions cross
remote replication
guidelines.
LUN automatic
assignment.
reference.
reference.
Advertisement
Table of Contents
Troubleshooting
