Changing Initial Settings; Storingchannelsin Memory (Optional); Auto Tuning; Local Time Setting - Toshiba 32TL515U Owner's Manual

How to navigate the menu:
4_P > Settings > Main menu > Submenu >
_,u Press the MENU button.
> Settings Press _ or • to select Settings.
Press _ or • to select a menu
> Main menu icon (PICTURE, SOUND,
APPLICATIONS,
PREFERENCES, SETUP)
> Submenu Press • or • to select menu.
> _qO Press the OK button
Changing Initial settings
From Quick Setup:
1 _"0
> Settings > SETUP > Quick Setup > _.
2 A confirmation message appears. Press _ or • to
select Yes. Press _).
3 For changing settings, see "Initial Setup" (_-v p. 26).
From individual settings:
Menu language
You can choose from three different language settings
(English, Fran£ais, and Espafiol) for menus and
messages
1 4_ . 0
> Settings > SETUP > Menu Language.
2 Press _
or •
to select your preferred language. Press
Local Time Setting
This setting allows you to specify the correct time zone
for your region.
1 _<,u
> Settings > SETUP > TV Settings > ,_.
2
Press • or • to select Local Time Setting. Press (LK).
3 Select an option:
• Time Zone
• Daylight Saving Time
4
Press _
or •
to select your time zone or to select On
to activate Daylight Saving Time. Press E_;_..
Location
You can select Home or Store for the TV location. For
normal home use, select Home.
1 ;_.0
> Settings > SETUP > Location.
2
Press _
or •
to select Home. Press ggi_
ANT/CABLEIN
This setting configures the antenna input source for the
ANT/CABLE terminal.
1 _.0
> Settings > SETUP > ANT/CABLE In.
2
Press _
or •
to select the input source
(Antenna
or
Cable) for the ANT/CABLE input. Press Eg*.
Storingchannelsin memory
(optional)
To make sure your TV stops only on the channels you
want when you press _ or _," on the remote control or
the control panel, store those channels in the TV's
memory.
AutoTuning
Note: You must set up the antenna/cable input source first.
See "Initial Setup" (_,_"p. 26).
You can set up the TV to detect all active channels in
your area and store them in its memory. Then you can
manually store or skip individual channels from
memory.
Cable
Antenna
Note: If you select Cable, auto tuning
deletes previously stored channels from
memory.
This setup requires some time, but you
do not need to repeat the setup unless
your cable TV service's lineup changes
significantly.
Auto tuning retains stored channels and
stores newly found channels into
1YlelYlory.
To skip an antemla source chmmel frolYl
memory, set the chmmel to be skipped.
See "Skipping charulels".
Note: To tune channels not stored in memory, use buttons
0-9 and [_ on the remote control
3O