3.3
Items Supplied by the User
Table 3-1 lists the additional items you must supply to perform the DSN-3000 series storage
system installation. All users must provide the items in the first row of Table 3-1.
Thereafter, the additional items required for installation depend on the user category into
which you fit.
Table 3-1. User-Supplied Items to Perform the DSN-3000 series Storage System Installation
User Category
All Users
DSN-3200 Users
DSN-3400 Users
Rack-Mount Users
Note 1: For convenience, one PC with three installed NICs can be used instead of separate PCs. In this configuration, one NIC
connects to the DSN-3000 series storage system management port, a second NIC connects to the Internet, and a third NIC is
used with the iSCSI initiator.
24
Chapter 3 Installing the DSN-3000 series Storage System
A PC with a Network Interface Card (NIC) that will act as the iSCSI initiator. (See Note 1.)
A PC with a NIC and Internet access that will access the management console. (See Note 1.)
One or more available AC outlets not controlled by a wall switch.
Optional: An Ethernet switch and Ethernet cable. If you want to use the DSN-3000 series storage
system's Link Aggregation feature, the switch must support LAGs.
An IP address for each DSN-3200 storage system host connection RJ-45 data port that will
connect to your SAN.
An Ethernet cable for each DSN-3200 storage system host connection RJ-45 data port that will
connect to your SAN (the DSN-3000 series storage system auto-senses the cable type used).
An IP address for the host network (optical) connection.
A single mode or multimode XFP optical cable to connect the host network connection to your
SAN.
A standard NEMA-compliant 19-inch rack.
Additional Mounting hardware for specific rack being used.
User-Supplied Items