A.3
Installing or Replacing SATA Drive
A.3.1 Drive and Tray Removal
A drive/tray assembly can be removed by pressing upwards on the green latch found on the
tray and removing it with the handle as shown in Figure A-15 and Figure A-16.
DSN-1100 Hardware Reference Guide
Removal of a populated drive/tray assembly can have unforeseen effects
including the loss of all data in a volume. A drive can be part of a volume
that may or may not be redundant. Before removing a drive from an
operating xStack Storage Array, make sure it is the correct one.
Figure A-15 Drive and Tray Removal
Figure A-16 Remove Drive/Tray
35