LG 32LC2DC Owner's Manual page 34

Operation
Setup Menu
- Automatically finds all channels
available through antenna or
cable inputs, and stores them in
memory on the channel list.
- Run EZ Scan again after any
Antenna/Cable connection changes.
A password is required to gain
access to EZ Scan menu if the
Lock System is turned on.
1
2
3
Press the MENU button and then use •/V button to select the SETUP menu.
Press the I_ button and then use • / • button to select £Z Scan.
Press the ENTER button to begin the channel search.
Allow EZ Scan to complete the channel search cycle for ANTENNA, and
CABLE.
b>
A password is required to gain
access to Manual Scan menu if
the Lock System is turned on.
1 Press the MENU button and then use •/V button to select the S£'l't_Pmenu.
2 Press the I_ button and then use •/V button to select Manual Scan.
3 Press the I_ button and then use • /• button to select TV, DTV, CATV,
and CADTV.
4 Press the I_ button and then use • /• button to select channel num-
ber you want to add or delete.
5 Press the ENTER button to add or delete for the channel number.
6
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
TV Analog antenna (over-the-air) TV signal CATV Analog cable TV signal
DTV Digital antenna (over-the-air) TV signal CADTV Digital cable TV signal
34