Motorola LS1000WB User Manual page 31

Compliance Information
Declaration of Conformity
This product is in compliance with the essential
requirements and other relevant provisions of Directive
2004/108/EC:
European Standard EN55022:2006 Class B,
EN61000-3-2:2006, EN61000-3-3:1995/A1:2001/A2:2005
and EN55024:1998/A1:2001/A2:2003
(IEC 61000-4-2:Edition 1.2:2001-04,
IEC 61000-4-3:Edition 2.1:2002-09,
IEC 61000-4-4:Second edition:2004-07,
IEC 61000-4-5:Edition 1.1:2001-04,
IEC 61000-4-6:Edition 2.1:2004-11,
IEC 61000-4-8:Edition 1.1:2001-03,
IEC 61000-4-11:Second Edition:2004-03)
and Australian Standard AS/NZS CISPR 22:2006 Class
B.
General information
FCC Statement
This device complies with Part 15 Subpart B of the FCC
Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
Subpart B of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
z
Increase the separation between the equipment and
z
receiver.
Connect the equipment into an outlet on a circuit different
z
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
z
for help.
31