Bosch 1618EVS - 2-1/4 HP Electronic Fixed Base D Handle Router Operating/Safety Instructions Manual page 18

BM 2610009156 03-10:BM 2610009156 03-10 3/4/10 1:47 PM Page 18
EDGEFORMING DUST
EXTRACTION HOOD
Do not reach in area of the
bit while the router is ON or
plugged in. To avoid entangling hoses, do
not use this dust extraction hood at the
same time as any other dust extraction
hood.
This dust extraction hood (optional accessory)
is used for dust collection when edge-forming
(Fig. 19).
ATTACHING DUST EXTRACTION HOOD
You can attach the edge-forming hood in
several places according to your needs or
preferences. This hood is attached using two
of the screw holes on the router base that are
used to attach the router's sub-base. Choose
the desired location for the hood. Loosen and
take out the two screws from the router base
and attach the dust extraction hood — over the
router's sub-base — using the screws provided
with the hood. Securely tighten the screws.
(Figures 20 & 21).