HP 6400/8400 Software Manual page 22

4. Click Switch Settings and enter the following information:
a. Enter the IP Address of the primary switch for the SAN for which you want a report.
Information will be collected for all devices connected to this switch.
b. Clear Discover connected switches. This option automatically detects all switches connected
to the switch identified by the IP address. Including all the cascaded switches increases the
data collected for the report to include all the devices connected to all the switches. If you
want to include all the switches, leave this option selected; to include discovery of subnet
switches, also select Subnet.
c. Enter the switch login and password if required. The Read Community value is obtained
from the switch.
d. If you have created more than one switch group, use the Select Switch Group drop-down list
to select the fabric to which you want to add this switch.
e. Click Discover Switch to discover the switch and activate the login and password. You should
see the extended switch information with IP addresses in the right-most panel.
f. Click Add to add the switch to the reporting configuration.
22 Pre-upgrade tasks