Extend the hard drive drawer.
3.
WARNING:
drawers.
CAUTION:
an extended period of time with the drawer open.
Hard drive blank
CAUTION:
unless all bays are populated with either a component or a blank. Remove a blank only when
there is a drive ready to install or the MDS600 is powered down.
To remove the component:
Extend the hard drive drawer (on page 25).
1.
Pinch hazard—Keep hands out of front and rear of chassis when closing hard drive
To prevent improper cooling and thermal damage, do not operate the MDS600 for
To prevent improper cooling and thermal damage, do not operate the MDS600
Removal and replacement procedures 26