Kenmore 7965 - 600 5.9 cu. Ft. Capacity Gas Flatback Dryer Installation Instructions Manual page 2

29" (73.7cm) gas dryer
Hide thumbs Also See for 7965 - 600 5.9 cu. Ft. Capacity Gas Flatback Dryer:
Table of Contents

Advertisement

Available languages

Available languages

WARNING
-
of
m
m
m
m
m
Clothes dryer installation
must be performed
by a qualified
installer.
install the clothes
dryer according
to the manufacturer's
instructions
and local codes.
Do not install a clothes dryer with flexible
plastic venting materials
or flexible
metal
(foil type) duct. if flexible
metal
duct is installed,
it must be of a specific
type identified
by the appliance
manufacturer
as suitable for use with clothes dryers.
Flexible venting
materials
are known to collapse,
be easily crushed,
and trap lint. These conditions
will
obstruct
clothes dryer airflow
and increase the risk of fire.
To reduce the risk of severe injury or death, follow
all installation
instructions.
Save these instructions.
iMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSi Z223.1iNFPA 54.
The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National
Electrical Code, ANSIiNFPA 70.
!
WARNING:
For your
safety, the information
in this manual
must be followed
to minimize
I
the risk of fire or explosion,
or to prevent property
damage,
personal
injury, or death.
I
J
- Do not store or use gasoline
or other flammable
vapors and liquids in the vicinity
of this
or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
® Do not try to light any appliance.
• Do not touch
any electrical
switch; do not use any phone in your building.
• Clear the room,
building,
or area of all occupants.
• Immediately
call your gas supplier
from a neighbor's
phone. Follow the gas supplier's
instructions.
® if you cannot reach your gas supplier,
call the fire department.
- Installation
and service
must be performed
by a qualified
installer,
service agency,
or
the gas supplier.
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend
that you use a gas detector approved
by UL or CSA.
For more information,
contact your gas supplier.
If a gas leak is detected, follow the "What to do if you smell gas" instructions.
2

Advertisement

Table of Contents
loading

Table of Contents