Connecting The Line Cables And Power Cord - Panasonic DX 1000 - PanaFax B/W Laser Printer User Manual

Connecting the Line Cables and Power Cord

02006000001
Ethernet-T oken-Ring
Bridge
(Optional Order
No. UE–204006)
10Base-T Ethernet Hub
J
Telephone Line Cable
Plug one end of the telephone line cable into the "RJ-11C" telephone jack supplied by the telephone company
and the other end into the LINE jack on the rear of the machine.
RJ-11C Telephone Jack
02006990001
J
Power Cord
Plug one end of the power cord into an ordinary 3 prong AC outlet and the other end into the receptacle on the
rear of the machine.
Warning : This apparatus must be properly earth grounded through an ordinary 3 prong AC outlet.
02006990002
Note:
1. Your machine uses little power and you should keep it ON at all times. If the power is turned OFF for too long,
the contents of the memory may be lost.
2. DX-1000 has 2 separate rechargeable batteries to preserve the memory contents in case of a short term power
failure. One for the machine parameters (such as LOGO, ID Number, Auto-dialer Telephone Number, etc.)
0200607001 1
which can back up for 10 days and the other one for the document memory, which can back up for 1 hour when
fully charged.
3. The built-in rechargeable batteries require 48 hours to be fully charged in the machine.
02006070012
02006070009
32
Do not break off the earth (ground) prong to fit a 2 prong outlet.
Ethernet LAN (10Base) Cable (not included)
Telephone Line Cable (Included)
Power Cord (Included)