Configuring Sound For Recording With The Sound Effect Manager (6-Connector) - HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER Getting Started Manual

34
Getting Started Guide
Configuring sound for recording with the
Sound Effect Manager (6-connector)
The microphone connector on the front of the 6-connector audio PC is ready to use
for recording sound. If you want to use another connector for recording, such as
the digital audio in connector, use these steps to select it.
The pink and green connectors on the front of a PC with 6-connector
NOTE:
sound can be retasked to perform other audio functions; refer to "Using the
Audio Wizard in the Sound Effect Manager (6-connector)"on page 36.
1 Click Start on the taskbar.
2 Choose Control Panel.
3 If it is present, click Sounds, Speech, and Audio Devices.
4 Click Sounds and Audio Devices.
5 Click the Audio tab.
6 In Sound recording select the default device from the drop-down list. Choose:
•
RealTek HD Front Pink Jack to use the microphone connector on the
front of the PC.
•
RealTek HD Digital Input to use the digital audio in connector on the
back of the PC.
•
RealTek HD Front Green Jack to use the green connector on the front of
the PC.
•
Back Line in/Mic, Front Line in to use the audio line in (in) or the
microphone (mic) connectors on the back of the PC, or to use the audio line
in connector on the front of the PC.
For this selection, the audio line in connector is ready to use. To use
NOTE:
the back mic connector, follow the steps in "Selecting the Back Line in/Mic,
Front Line in connectors for recording (6-connector)" that follows this
procedure.
7 Click Apply, and then click OK to close the window.
Selecting the Back Line in/Mic, Front Line in connectors
for recording (6-connector)
Perform these steps when you select Back Line in/Mic, Front Line in for the sound
recording in step 6 of the previous procedure.
If you want to record from the mic connector on the back of the PC, you
NOTE:
must perform these steps.
1 Click Start on the taskbar.
2 Choose Control Panel.