Installing/Uninstalling The Program; Installing - Canon CanoScan D1230UF User Manual

Installing/Uninstalling the Program

This section explains how to install ScanGear Toolbox from the CanoScan Setup CD-ROM
supplied with your scanner. To install a copy of the program that has been downloaded, please
see the instructions on the web site for the downloaded file.
• You must log on as the Administrator to install or uninstall the program into Windows
NT or Windows 2000.
• It is advisable to install the driver software for your scanner and printer before
installing ScanGear Toolbox.

Installing

• The following installation procedures are not required if you have already installed
ScanGear Toolbox according to the instructions in the Quick Start Guide supplied with
your scanner.
1.
Set the CanoScan Setup CD-ROM that was supplied with your scanner
into the CD-ROM drive.
2.
In the CD-ROM's main menu, click the [Install the Software] button.
3.
Confirm that a check mark appears beside [ScanGear Toolbox] in the
[Install] window.
• If there is no check mark, click the box to insert one.
4.
Click the [Start Installation] button and follow the onscreen
instructions.
• The installation will begin. When it finishes, ScanGear Toolbox will be added to
the Windows Start menu.
5