Panasonic WV-CW504SE Installation Manual page 22

x
Remove the enclosure and inner
dome from the main body by loos-
ening the three fixing screws.
Loosen the three fixing screws by using
the provided bit for tamperproof screw.
Detach the inner dome while pushing the
parts with the "PUSH" indication.
Important:
• Do not hold the inner dome when carrying
the camera. Otherwise, the camera part
may fall and it may damage the camera.
Note:
• Perform the same procedure when replac-
ing with the optional dome cover WV-
CW4S.
c
Secure the camera to the bracket
with the camera fixing screw (red, 1
position).
Important:
• The camera fixing screw shall be securely
tightened. Otherwise, water exposure may
cause damage or malfunction of camera,
or camera dropping may result in injury.
(Recommended tightening torque:
0.78 N·m)
v
Remove the screw (blue, 1 position)
for transport protection with a
Phillips screw driver.
22
Press the parts with the
"PUSH" indication.
Camera fixing screw (red)
Screw for transport protection (blue)
* The camera fixing screw
shall be securely tightened.